What Does It Mean To Have A CB Radio Peaked And Tuned?

What does it mean to have a CB radio peaked and tuned? A: In general, to peak and tune your radio means to increase its performance by tuning the antenna with the help of an SWR meter or a friend.

Additionally, What channel do you calibrate a CB radio?

Set the CB radio to channel 1 and switch the SWR meter to calibrate. Press the microphone button but do not talk into it. Switch the selection on the SWR meter to "SWR" while holding the mic button. If the reading on the meter is 1:5 or less you don't need to adjust the antenna.

Secondly, How do I peak my CB radio?

In conjunction with, What does RF gain do on a CB radio?

Noise interferes with signals and it comes from the atmosphere, other nearby channels that overlap slightly, and environmental surroundings. To counteract noise, RF gain acts as a sensitivity filter. It reduces noise in the receiver without reducing reception power as a CB radio squelch does.

How do you set SWR on a CB radio?

Turn the radio to channel 1. Key the microphone (depress the button and hold it). Turn the knob on the SWR meter labeled “SET” or “ADJUST” until the needle reaches the setting position at the end of its range. While still keying the microphone, flip the switch on the SWR meter to the “REF” or “SWR” position.

Related Question for What Does It Mean To Have A CB Radio Peaked And Tuned?


How do you use a squelch CB radio?


How do you calibrate a Road King CB?


What should the SWR be on a CB?

SWR Range Explanations:

SWR 1.0-1.5: The ideal range! If your SWR is under 1.5, you're in great shape. If you're at 1.5 and really, really want to drop down to closer to 1 it's likely possible to do with addition tuning, different equipment or a different mounting location.


Where does the plastic washer go on a CB antenna?


Was this helpful?

0 / 0

Leave a Reply 0

Your email address will not be published. Required fields are marked *