What Do You Do When The Pilot Light Goes Out On A Gas Fireplace?

What do you do when the pilot light goes out on a gas fireplace? If possible, shut off the main gas supply valve by turning it clockwise (to the right). Once at a safe distance, report the potential gas leak to your propane dealer or 911. Do not return to the building until a qualified service technician or EMT says that the building and gas system are safe.

Similarly, Should the pilot light always be on in a gas fireplace?

Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.

As a consequence, Why can't I light the pilot light on my gas fireplace? If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

Hereof, How do you start a fire in a gas fireplace?

  • Step 1: Remove the outer cover of the fireplace to access the burner.
  • Step 2: Locate the metal keyhole near the fireplace.
  • Step 3: Insert the end of the key into the keyhole until it locks in place.
  • Step 4: Ignite a long lighter and place it next to the pilot burner.
  • How do you reignite a pilot light?

    Relight the pilot light.

    Turn the knob to “Pilot,” and let gas to flow to the pilot. Light a lighter or match, then push in the reset button. Hold your flame to the pilot light's opening. Keep the reset switch depressed until the pilot light is burning steadily.

    Related Question for What Do You Do When The Pilot Light Goes Out On A Gas Fireplace?

    How do you reset an automatic pilot light?

    Press the gas control knob down all the way and hold it in the depressed position. If you have no igniter, move the match or barbecue lighter flame to the end of the pilot tube; the pilot flame should light immediately.


    Are pilot lights supposed to stay on?

    Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. As you can see, it's probably best in most cases to extinguish the pilot light in your gas fireplace during the months when you don't need heat.


    Will gas leak if pilot light is off?

    If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.


    Why is my gas fireplace not igniting?

    Another common issue with ignition is a dirty pilot light orifice, caused by a buildup of soot and dirt. If you have successfully re-lit your pilot light, ensured that the orifice is clean, and the fireplace still refuses to ignite, there could be an issue with the thermopile, thermocouple or wiring.


    Why is my gas fireplace not turning on?

    Check the Spark Igniter

    If gas is coming out of the pilot but it still won't light, the spark igniter could be the problem. You should clear out any debris between the igniter and thermocouple. Blowing compressed air into the pilot area, waiting a couple minutes, then trying again could help to fix the problem.


    How do I turn my fireplace key on?

  • Look over the user manual included with your fireplace.
  • Remove your fireplace's outer cover.
  • Put a fireplace key into the device's gas valve knob.
  • Hold a long lighter up to the burner and ignite it.
  • Turn the gas key.
  • Replace the fireplace's outer cover immediately.

  • How do you turn on a fireplace pilot?


    How do you light a gas fireplace fire?


    How do you light an old gas fireplace?

    Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it's been since the gas fireplace was last used, ignition may take multiple attempts.


    How do I know if my pilot light is out?

    Remove the front cover panel on your furnace. This should expose the pilot, which simply looks like a small single burner, kind of like a candle or if you only had a single flame lit on a gas stove. If there is no flame, then the pilot is out.


    What do you do if your pilot light won't light?

    If your pilot light won't stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.


    Is it safe to relight a pilot light?

    But first, some words of caution: --Don't relight the pilot light if there is a strong gas odor. Close the main gas shut-off valve for your house or for the appliance with the leak and call the gas company immediately. Get everyone out of the house until the problem is corrected by gas company technicians.


    What does the pilot light look like?

    If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don't see a flame, your pilot light is out. If there is a flame, check the color. Pilot lights should always be blue.


    How do you restart a gas furnace?


    How much does it cost to keep pilot light on fireplace?

    The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year. Liquid Propane is $1.80 a day = $657 a year. Sophisticated fireplace manufactures like Travis Industries have developed Intermittent pilot light systems.


    How do I fix the igniter on my gas fireplace?


    How does a fireplace ignitor work?


    How do you light a gas fireplace with a key and igniter?


    Was this helpful?

    0 / 0

    Leave a Reply 0

    Your email address will not be published. Required fields are marked *