Are Gator Blades Better Than Mulching Blades?

Are Gator blades better than mulching blades? Unlike other mulching blades that push the grass down, the high lift on a gator blade draws the grass up which in turn gives you a clean, even cut. We do recommend a mulching kit for a single blade deck however, you will still see a much better mulching result with a Gator Blade with out the attachment.

On the other hand, Which is better high lift or mulching blades?

Essentially, the greater the lift, the more horsepower that's required. You would use High-Lift blades when tackling taller, more dense grass (High-lift = higher-lifting airflow). You should not use Lifting blades for mulching.

Secondly, What are the toughest mower blades? The E6 blades are the widest, thickest blades offered by USA Mower Blades. E6 blades are 3-inches wide and 0.250-inches thick. These extra-thick blades are heavy-duty and will tackle any lawn with ease. Designed for commercial applications, E6 blades offer unmatched durability and longevity.

In like manner, Are thicker mower blades better?

When you cut grass, a mower has to have a process for moving the grass clippings out of the way. Thicker grass is especially hard, because there is less area under the mower to move the clippings. Certain lawn mowers work best for cutting a thicker grass blade, but the mower blade also plays a role.

Are Copperhead mower blades any good?

They fit just fine and really cut the grass nicely. They were easy to install and do a nice job of mulching the grass into smaller pieces. If you're looking for replacement blades for your D105 or like, these will work fine and do the job. I will be buying them again when these wear out.

Related Question for Are Gator Blades Better Than Mulching Blades?

Are Gator blades worth it?

Gators are very good blades. But as with all blades the cutting ability has to do with lots of factors. First Gators are not high lift so you will have that problem. I run them in the spring early summer when grass is growing and strong.

Do high lift blades stripe better?

High lift types provided me a very good quality cut, perked the grass up (more suction), stripes nicely and side discharged clippings nice and far. They are best for bagging clippings/leaves though.

Are toothed mower blades better?

Toothed lawn mower blades are the ideal 3-in-1 blade as they offer the best of all three intended purposes. Using a toothed blade solely for mulching purposes may not be ideal since some toothed blades do not have the extended cutting edge.

What is the point of high lift mower blades?

High-lift blades have deeper curves on the ends, which create enough suction to circulate and expel the clippings. The higher air flow also helps prevent clogging when mowing tall or wet grass. A high lift blade is a unique style of blade designed with larger wind wings which increase airflow.

How sharp should mower blades be?

Mower blades should be aggressively sharp, but not as sharp as a razor's edge. You should be able to touch the blade with your hand without getting cut. Contrary to popular belief, a lawn mower blade with a razor sharp edge will not cut grass better.

Are mulching blades better?

Mulching blades feature more curves and an increased cutting edge. The curved surface and increased cutting edge allows the blade to cut the grass and bring it into the deck where it is cut several more times before falling back onto the lawn in much smaller pieces.

How often should mower blades be sharpened?

This keeps your mower in good shape and helps to maintain a healthy lawn. However, if you mow more often, the blades will need more attention. On average, a mower blade should be sharpened after every 20 to 25 hours of use time.

Should mulching blades be sharp?

Sharpen the blade twice each season to help maintain a green, healthy lawn. A sharp blade not only cuts blades clean so grass plants recover quickly, it helps reduce your lawn mowing time.

Should you sharpen new mower blades?

As mentioned above, brand new lawn mower blades do not need to be sharpened because they are always sharpened during manufacturing. However, lawn mower blades do generally need to be sharpened at the beginning of each new season.

Should you sharpen lawn mower blades?

It's recommended that you sharpen the blade of your lawnmower at least once a year. Dull blades will roughly rip through grass, leaving behind raggedly torn tips on the ends of the individual grass blades. And that can cause the grass to turn brown and leave your lawn more susceptible to disease and pests.

Can you sharpen Gator blades?

The teeth on the Gator Mulcher do not cut the grass, so sharpening them isn't required. Simply sharpen your GatorMulcher as you would any standard mower blade.

Where are Xht blades made?


Are Oregon mulching blades any good?

They seem to do a somewhat better job than the standard mulching blade. In fact, they work as good as the hi-lift bagging blades so I can mulch and bag with one blade. the clippings themselves do cut more finely, but I still get clumps of grass at times, and yes I drive slowly over the grass.

Can you use gator blades with side discharge?

Gators tend to move less air than most stock blades. They also tend to make grass just disappear. They will work OK as side discharge but you may notice less grass discharging and at lower velocity.

Can a John Deere Gator cut grass?

Swisher Finish-Cut Mower

It's just the John Deere way, it seems. One accessory that makes a ton of sense and works very well with the Gator is a Swisher 44-inch Finish Cut Trail Mower. This powerful, pull-behind mower makes short work of your lawn, trail or other area that needs to be mowed quickly and efficiently.

What is the best mowing pattern?

Cardinal Lawns recommends alternating directions each time you mow, so if you mow vertically one week, go in a horizontal pattern the next.

How do you mow like a pro?

  • Alternate your mowing route. Lawns that are mowed the same direction every time develop unsightly stripes that may grow back irregularly.
  • Mow early.
  • Take your time.
  • Adhere to the one-third rule.
  • Don't cut your grass too short.
  • Keep your blade sharp.
  • Water infrequently but deeply.

  • What's the difference between a high lift blade and a mulching blade?

    Standard blades are also referred to as "2-in-1" (discharging & bagging) or "high-lift" blades (because they are designed to create a higher-lifting airflow). Mulching blades generally have a more curved style surface and frequently include extra cutting surfaces along the blade edges.

    How often should you change mower blades?

    A good rule of thumb for the average homeowner is to replace your mower blades annually. You may also think about replacing them if they become damaged. Dig up that product manual if you want a more clear-cut answer. Always make sure to take protective measures whenever sharpening your mower blades at home.

    Can you use gator blades with a bagger?

    Several people there mention they work great with a bagger. I just put them on my 42" L110 last week, but have only cut with them once and without the bagger or mulch plug.

    Why does my lawn mower leave a strip of grass?

    The shape of lawnmower blades causes the blades to pull grass upward; when you mow, the machine's tires push down the grass and prevent that one thin area from being pulled up by the blades' suction. A streak of uncut grass also could be the result of the mower blades being too short for the mower deck.

    Are mulching blades low lift?

    While low-lift blades are ideal for mulching and depositing clippings back on turf after thoroughly dicing it, they struggle with taller grass and easily clog or even stall.

    What is the difference between high lift and medium lift mower blades?

    Blades with a higher lift require more power. Mowers that are not equipped with enough horsepower may have a hard time cutting grass with high lift blades. Sand and dust sucked into the deck can prematurely wear the blades and equipment. Medium Lift – 3/4 in. to 15/16 in.

    How do I choose a lawn mower blade?

    The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.

    How do I know if my lawnmower blade is sharp?

    The first and most obvious thing to look for is unevenness in your lawn. When your lawn mower blade is sharp, your grass should be cut at the same height every time with just one pass of the mower. If you find yourself making multiple passes to compensate for missed patches of grass, a dull blade may be the culprit. 2.

    Does wet grass dull mower blades?

    Cutting wet grass can dull the blade more quickly. Clean blades thoroughly before and after mowing a lawn when wet to keep the cut as sharp as possible. Maintain your machine and sharpen mower blades regularly to deliver a clean, healthy cut.

    Do you sharpen both sides of a mower blade?

    No – lawnmower blades should be sharpened like scissors where one side is sharp and the other dull. Unlike a knife-edge, where both sides are tapered, a mower blade should have one side sharpened at a roughly 45-degree angle, and the other side should be left alone except for smoothing any jagged edges.

    How do you sharpen mower blades?

    How much does it cost to sharpen mower blades?

    If you want to choose a professional, lawn mower blade sharpening can cost about $5 to $15 per blade. If you remove the blade and bring it to them, the costs can be around $5 less. According to, lawn mower sharpening services usually cost around $15 per blade.

    Which is better mulching or side discharge?

    If you are simply looking for a quick cut, the side discharge method is likely the way to go. It won't look as neat and clean as bagging, but it will take substantially less effort. If you're looking to really give your lawn a new life and get more vibrance out of your grass, mulching may be the way to go.

    Is it better to sharpen or replace mower blade?

    Lawn mower blades are built for durability and can usually be salvaged with regular sharpening. However, if you notice large dents and chips on the edge that aren't smoothed out with a blade sharpener, it's time to invest in new blades. If your blades are worn thin, replace them immediately to avoid breakage.

    How often should lawn mower oil be changed?

    Taking proper care of your lawn mower will help your machine run well for years to come. One overlooked aspect in lawn mower maintenance is how frequent oil changes should take place. Engine oil and oil filters should be replaced at least once every spring or summer, or every 50 hours of use - whichever comes first.

    Was this helpful?

    0 / 0

    Leave a Reply 0

    Your email address will not be published. Required fields are marked *